Zenitel Phontech ICS 6200, Installation Manual

Page: 62 / 193

p/n
4000087299
v.I
Page 2-60
All the speed dial buttons can either be pushed once or held down. If the buttons are pushed the
calls must be terminated by either by putting the handset back on-hook or pressing the ACT key.
If the buttons are held down the call will automatically terminate once the button is released.
Figure 2-45 - Changing Global UpN Settings
2.3.5.1 Custom System Sounds
The Phontech 6200 system allows you to change some of the default sounds and notifications used
in the system. To change these sounds you must go to the "Custom Sound Files" screen found under
the "Tools" menu.
Before any of the default sounds can be changed you must first upload some new sounds. This is
done by clicking the "Add" button on the right side of the "Uploaded sound files" list. This will open a
file dialog where you can select a sound file to upload. The sound file can be either a .wav file or an
.mp3 file. For the best quality they should be in 8000 Hz Mono. When the file us uploaded it is
transcoded to the internal format used in the Phontech 6200 system. You can listen to the result of
the transcode by clicking the newly uploaded file in the list and then click the "Play" button to the
right of it.
After one or more files have been uploaded they can be selected in the drop down boxes to the right
of the page. This will change the sounds in question to the one you have selected. Uploaded sounds
are also used in other parts of the application such as in the Trunk Line properties screen where you
can select the sound that will play when a "Switchboard" configuration is used.