10
11
Installation
Network
Connect the ICX-510 to the IP network. Use an Ethernet cable. Connect the
cable to
Ehernet Port 1
.
1
IP
network
2
Connect the power supply
Mount the
IPS-AC1
power supply on
a DIN rail and terminate the power
cables.
3
+
Power out
Power in
L1 N
Ferrite
Before connecting the cable to the ICX-510, the
Snap On Ferrite
(EMKOB99121) must be attached near the end of the cable.
4
Connect the ICX-510
Connect the power cable to the ICX-510. Then connect the power supply to a
100-240VAC power source.