24
25
6
Verify that microphone and speaker wires are correctly connected.
Speaker
+
Red
-
Yellow
Microphone
+
White
-
Black
7
1. Reattach the back plate
To maintain the IP-66 rating on the speaker, use a tightening
torque of 0,8 Nm.
2. Make sure to tighten the cable gland sufficiently to attain IP-66 rating
for watertightness, but be aware of plastic material limitations.
•
In order to ensure the required minimum degree of protection, the
cable glands must be tightened securely.
•
When tightening the
cap nut of a cable gland,
a suitable tool shall be
used to prevent the
gland from twisting.
8
Connect the speaker to the network.
9
The speaker can operate in three different modes, depending on what
kind of server it should register to. Scan the QR-codes below according to
what mode you need to configure.
SIP Mode
ICX - AplhaCom
Edge Mode
Microphone
Wire
Speaker
Wire
