Zenit RH-1300, Instruction Manual

Page: 5 / 12

5
technical SpecificationS
model rh-1300
rated power 1300 W
rated voltage 220-240 V
rated frequency 50-60 Hz
Max drilling diameter
wood 40 mm
steel 13 mm
concrete 26 mm
no load speed 1100 rpm
impact rate 4200 spm
impact energy 3,5 J
StanDarD acceSSorieS
Wrench 1
side handle 1
Standard accessories are subject to change without notice.
applicationS
Drilling anchor holes
• Drilling holes in concrete
• Drilling holes in tile
rotation only function
• Drilling in steel or wood (with optional accessories)
• Tightening machine screws, wood screws
prior to operation
1. power source.
ensure that the power source to be utilized conforms to the power requirements speci-
fied on the product nameplate.
2. «on\off» switch.
ensure that the power switch is in the off position. if
the plug is connected to a receptacle while the power switch is in the on position, the
power tool will start operating immediately, inviting serious accident.
3. extension cord.