Horizon 203 (S3 PRO) User manual, 2004 year
– 6 –
perspectively distorted picture, the level ball should be in the centre of the light circle seen in the
viewfinder.
For vertical shots no level is used.
Having prepared the camera for shooting press the release button as far as it will go to take a
picture.
Remember, that sharp pressing on the release button results in camera shake at the moment of
exposure and thus in blur of the picture.
To take pictures with longer exposures than 1/60 sec. the shutter is better released with the help of a
cable release which is screwed into the release button socket.
You can as well make use of a tripod having removed the handle
24
beforehand.
4.6. Camera Unloading
When the exposure counter shows figure
22
, the film shoud be rewound back into the cassette and
the camera unloaded. To do this:
— Press button
21
on the camera bottom.
— Flip open crank
8
and rotate it in the arrow direction till the film leader leaves the take up spool.
Try to rotate the crank smoothly, without jerks and not too fast to avoid traces of static electricity on
film.
— Pull film rewind knob
5
all the way out; open the back door. Remove the cassette, holding the
film rewind knob.
If necessary, the camera can be unloaded after exposing any number of frames, having rewound the
film into the cassette beforehand.
4.7. Mounting the Filters
Mount the filter on the camera. To do this, with the help of the shutter
cocking lever, aling the lens axis with the film gate centre in body. Through
the cylindrical cup window put the filter mount into the lens body socket. In
so doing, press the filter spring and put it behind the cup window (see the
diagram).
To remove the filter, take the second one delivered with camera, and
coupling the hooks, slightly draw the filter in the direction indicated by an
arrow in the above mentioned diagram.
http://eugigufo.net/it/download/photovideo/
