Zenit BC-1400, Instruction Manual

Page: 9 / 12

9
Do not use serrate blades with this tool
ATTENTION!
Do not trim with blunt or damaged blade.
Inspect the area to be cut before each use. Remove objects which can be thrown or
become entangled.
ATTENTION!
Wear the harness. Adjust harness to lift cutting mechanism on several dozens of mil -
limeters from the ground. Cutting head and blade guard must be horizontal in all direc -
tions. Wear shoulder harness on right shoulder.
ATTENTION!
Do not use blade for cutting trees with diameter more than 18 mm.
Do not apply too much force to blade. Do not change cutting angle.
When using the screwdriver follow these rules:
• continuous use of the tool should not exceed 15 minutes;
• do not allow mechanical damage (strikes, falls etc.);
• protect the drill from external sources of heat and chemically active substanc -
es, as well as liquid and objects penetration;
• before disconnecting the tool from the power source turn off the On/Off switch;
• check the engine temperature, do not allow overheating;
• change the rotation direction only after switching off the tool and complete
stop of rotating parts.
Inobservance of these rules will make warranty void!
WARNING
Repair, modification and check of ZENIT power tools should be performed only in
authorized service centers ZENIT. While use or maintenance of power tools follow all
safety rules and standards.