User Manual For RS485-ZDM556C Stepper Drive
Office Add. : C-83, Zaveri Industrial Estate, Kathwada – Singarva Road, Kathwada, Ahmedabad-382430.
Email :
,Website :
www.zenexautomation.net
Contact (M) : +91 – 9727764623 / +91 - 9978030413
recommended that users use DC voltage lower than the maximum voltage to supply power and avoid the
fluctuation of power grid beyond the working range of driver voltage.
If you are using a regulated switching power supply, be aware that the output current range of the switching
power supply needs to be maximized.
Please note!
A:When wiring, pay attention to the positive and negative poles of the power supply.
B:Better use non-regulated power supply;
C:When use a non-regulated power supply, the power supply current output capacity should be greater than
60% of the drive setting current;
D:The use of regulated switching power supply, the output current of the power supply should be greater than
or equal to the working current of the driver;
E:To reduce costs, two or three drives can share a power supply, but should ensure that the power supply is
large enough.
