Zenet ZET-515, User Manual

Page: 8 / 12

4.
Position 0:
The heater is "Off"
Position 1 on right side:
The heater in condition1 ---400 watts.
Position 2 on right side:
The heater in condition2 ---1000 watts.
Position I on left side:
The heater in condition1 ---400 watts with oscillation
Position II on left side:
The heater in condition2---1000 watts with oscillation
5. Turning and oscillation:
This heater can oscillation right and left in 90 degrees
6. After using it, turn the switch on position “0”, and pull out the plug.
Warning Instructions
:
1. Do not place inflammable objects in the heater's proximity.
2. It is strictly prohibited to place anything on the heater, and therefore food cooking or
heating on the heater is forbidden.
3. Do not cover the heater.
Warning: do not cover the heater
4. Do not use this heater in immediate surrounding of a bath, a shower or a swimming pool.
5. A damaged electrical cord may only be replaced by qualified electrician or in laboratory
certified by the importer.
7. The heater must not be located immediately below a socket-outlet.
8. Do not use this heater with a programmer, timer or any other device that switches the
heater automatically, since a fire risk exists if the heater is covered or positioned
incorrectly.
9. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to ensure that they do not play
with the appliance.
10. Warning: This heater is not equipped with a device to control the room temperature. Do
not use this heater in small rooms when they are occupied by persons not capable of
leaving the room on their own, unless constant supervision is provided.