II. Precautions
1. Part-time workers and unauthorized repairers are forbidden to repair or
remold the fan.
2. Wet hands are not allowed to operate the fan to avoid electric shock..
3. If power cord is aged and knotted or the plug is damaged, they should be
out of service at once and repaired by professional manufacture or full-time
repairers with equal qualification.
4. It is not allowed to clean, maintain and move the fan when the power
supply is connected.
5. Pull up the power plug when the fan is to be laid aside for a long time.
6. Do not insert foreign matters into the air inlet/outlet; otherwise, it will do
damage to the fan.
7. It is not allowed to use the fan in an inflammable and explosive
environment and not advisable to expose the unit to strong lighting.
8. Do not put the fan in an inclined or unbalanced position to avoid the fan
falling down, which can be detrimental to the fan or the components inside.
9. The fan is applicable indoors while outdoor use is forbidden.
10. When the water tank is full, do not incline or collide the fan when putting
or moving it. If you intend to move the fan, push it slowly and gently from
side. please prevent the water from overflowing.
11. It’s unallowable turning over the fan, or the accidents arise. In case the
fan is turned over for careless causes and the fan has water in it, pull the plug
right away. It should not be turned on before 24 hour’s drying.
12. Do not put any articles on the fan and cover the air outlet with it.
13. When cleaning the surface of the fan, damp cloth (detergent can be
added) is recommended, and corrosive detergent or solution is unallowable.
Do not use the water to rinse the fan.
14. Do not close the air inlet/outlet with the wall, curtain and other real
objects; otherwise, it will block the airflow, thereby influencing the air
supply effects.
15. It is not permitted to knock or vibrate the fan when it is in action;
otherwise, automatic halt can be brought about. At this point, re-start the fan
only.
16. The applicable temperature range is -20 to 40 . The water in the tank
℃
℃
is easy to deteriorate and give off-flavor, so please change water regularly.
17. Do not put the fan under the power plug directly.
18. Do not use the fan around the bath, shower nozzle or swimming pool.
19. The fan is qualified to be maintained at the specified maintenance shops.
Attention:
1.Please keep the water level at an appropriate level---no more than the
“MAX” level.
2.If the cooling function is wanted, please keep the level no less than the
“MIN” level.
3.Please disconnect the power supply while adding water.
III.Main Technical Parameters
Model
703-C
Rated voltage
220V~
Rated frequency
50Hz
Rated power
70W/2000W
Capacity of water
4.0L
Wind speed
8.0 m/s
Evaporation capacity
450mL/h
Energy efficiency
9.0W/W
Noise
≤60dB
Type
Cooling/Heating
Summary of Contents for LFS-703C
