ZENEC ZEM-W700DMM, Instruction Manual

Page: 40 / 52

40
RADIO OPRATIONS
RADIO REMOTE CONTROL
FUNCTIONS
Radio Station Selection
1. Press the [Source] button until the radio
function is selected.
*The initial mode is Radio mode.
2. Press the Band/RPT button to select
the band:
FM1
➞
FM2
➞
FM3
➞
MW1
➞
MW2
3. Press the ENTER /
5
or /
6
keys to
select the previous or next pre-set
station.
Store Preset Station to Memory
1. Press the ENTER/
5
or /
6
keys to
select the desired radio station to be
set into memory.
2. Press and hold the ENTER/
5
or /
6
keys to start storing function .
3. Press the ENTER/
5
or /
6
key again
to select the desired location.
4. Press and hold the ENTER/
5
or /
6
key again to store the station into
memory.
Auto Scan
■
Press and hold the [BAND/RPT] button
which enables the tuner to scan
through the entire FM &MW frequency
spectrum and automatically store all
currently available frequencies in its
memory.
Manual Scan
■
Press the [
9
or
:
] buttons to scan the
frequency band step by step, or hold
down the keys to to automatically scan
up or down to the previous or next
available station frequency.
Volume Adjustment
1. Press the Volume C/- buttons
to increase or decrease the playback
volume.
2. Press the Mute button to disable sound.
Band
■
Press the [Menu/Band] on the remote
control to switch from one band to
another.
FM1
➞
FM2
➞
FM3
➞
MW1
➞
MW2
Scan (Auto)
■
Press and hold the [Menu/Band] button
to allow the unit to scan through the
entire frequency spectrum (FM/MW)
and store all available radio stations in
its memory.
Manual Scan
■
Press the [
9
or
:
] button to scan the
frequency band step by step, or hold
down the keys to automatically scan
up or down to the previous or next
available station frequency.
Selecting Station
■
Use the [ENTER/
5
or /
6
] key to
navigate to the previous/next available
preset channel.
Number Keys
■
The 1-6 Keys can be used to select the
preset stations that have been stored in
the memory.
■
Press and hold one of the keys to store
the current frequency into the memory.
Audio
■
Press the [AUDIO/ST] to select either
mono or stereo output.
ZEM-W700DMM Manual E.indd 40 17.11.2004 16:14:38 Uhr