ZENEC ZE-DVBT50, User Manual

Page: 34 / 52

34
pLACINg ANd CoNNECTINg ANTENNAS
NoTE:
■
reception quality is largely dependent on proper positioning of the antennas.
please keep that in mind, when mounting.
■
Do not place them under any metal obstacle (car roof) or metal coated screen (i.e. full-
screen heating or insulation).
■
bear in mind that you have to place the two antennas as far as possible from each other
to achieve a good reception.
■
a direct and non obstructed line-of-sight of the antennas to the sky is mandatory for
best results.
■
lay the cables for the antennas first. check for correct wiring. clean the surface where
the antennas will be mounted. make sure it is dry and free of any greasy substances.
Strip the protective sheet from the adhesive backside and push the antennas firmly into
their final position.
■
reception differs a lot regionally.
You may encounter distortions in some densely populated areas or in cities with sky
scrapers.
x
x