ZENEC ZE-AVS, Instruction Manual

Page: 12 / 16

12 13
ENGLISH
12 13
ENGLISH
CONTROLS & KEYS OF THE REMOTE CONTROL
The ZENEC ZE-AVS switcher can only be operated by using the remote control.
The remote control is grouped in four blocks: Monitor 1, Monitor 2, Monitor 3, Monitor 4.
The IR–sensor must be connected to the IR-input socket of the main device.
For proper use of the remote control, there should not be any obstacle in the direct path
between the remote control and the IR-sensor.
Each button (1-4) on the remote is dedicated to an A/V Output. If you push one of the
buttons, the corresponding A/V-output will be activated.
For example:
Push button AV1
➜
A/V-Output 1 is activated
➜
The AV-Signal from A/V-Input 1
is displayed by A/V-Output 1.
Push button AV2
➜
The AV-Signal from A/V-Input 2
is displayed by A/V-Output 1.
Push button AV3
➜
The A/V-Signal from A/V-Input 3
is displayed by A/V-Output 1.
Push button AV4
➜
The A/V-Signal from A/V-Input 4
is displayed by A/V-Output 1.
The procedure applies for all 4 A/V-Outputs
MONITOR 1
POWER
MONITOR 2 MONITOR 3 MONITOR 4
A/V1 A/V1 A/V1 A/V1
A/V2 A/V2 A/V2 A/V2
A/V3 A/V3 A/V3 A/V3
A/V4 A/V4 A/V4 A/V4
ZE-AVS Manual E+D.indd 12 15.08.2007 11:06:59 Uhr