6
7
VOLUME CONTROL
Function
Button
Operation
Increase volume
Turn volume knob (fig. S/01
) clockwise.
Reduce volume
Turn volume knob (fig. S/01
) counterclockwise.
Mute
Short press the rotary knob on the left (fig. S/01
).
Pressing the button again will cancel the muting.
Default settings
The default settings of the different sources can be set in
Setup.
Device User Manual → Setup → Audio
ZENEC System
Multifunction steering wheel
1)
Function
Button
Operation
Increase volume
+
Press button (fig. S/02
) to increase volume.
Reduce volume
–
Press button (fig. S/02
) to reduce volume.
Mute
Briefly press button (fig. S/02
).
Pressing the button again will cancel the muting.
NOTE
1)
These functions can only be used when a multifunction steering wheel is installed in the vehicle,
and the ZENEC system is connected via a car specific CAN/Stalk interface.
SOUND SETTINGS
Function
Icon
Operation
BASS
Touch to adjust the bass range from -6 to +6.
MID
Touch to adjust the mid range from -6 to +6.
TRE
Touch to adjust the treble range from -6 to +6.
Ultra bass
Touch to add extra amplification to the bass output.
Loudness
Touch to add extra amplification to the low and high output.
In this menu you can make the various sound settings. Tone control is available for each source
separately.
Fig. S/03
