Technical
modifications
excepted.
No
liability
accepted
for
printing
errors.
©
Copyright
2023
·
RevC
/
copy
deadline:
Q2-2023
·
English
Product Description
Compact universal rod type antenna with adhesive mounting: The magnet pill provides for a fast and simple,
non-invasive car body ground reference. Good reception performance for this particular type of antenna is the
second advantage.
Key Features
• Active DAB+ antenna for easy mounting on the inner side of the windshield
• 90° SMB antenna connector (f), 3.0m cable length
• Ground connection of the antenna to the vehicle using a small magnet
• ESD protected
Technical Specifications
Reception frequency range:
Band III, 174~240MHz (no L-Band coverage)
Antenna impedance:
50 Ohm
Antenna gain:
16dB ±2dB
Operating voltage:
9~16V
Current consumption @12V: 10mA
Power consumption @12V:
120mW
Operating / receiving frequency
This product contains an amplifier module for the frequency spectrum received by the antenna in band III, from
174 - 274 MHz.
Radio Frequency Exposure Information
This device complies with EU requirements (2014/53/EU Article 3.1a) to limit exposure of the general public to
electromagnetic fields for health protection.
Do not use the device in locations where wireless devices are not allowed.
ZENEC cannot guarantee that accidents or damage will not occur due to improper use of the device. Use this
product with care and at your own risk.
Conformity with radio equipment
Hereby, ACR Brändli + Vögeli AG declares that the type of radio equipment Z-EACC-DAB2 complies with the
2014/53/EU Directive. The full text of the EU Declaration of Conformity is available at the following Internet
address: http://www.zenec.com (see link "Product Conformity Documents" in the footer area of the page).
Recycling Notes
This product bears the symbol for selective sorting of Waste Electrical and Electronic Equipment (WEEE).
This means that this product must be treated in accordance with European Directive 2012/19/EU in order to
be recycled or dismantled to minimize its impact on the environment. The user has the choice to hand over his
product to a competent recycling organization or to the retailer when a new electrical or electronic device is
purchased.
UK Authorised Representative
(for authorities only)
ProductIP (UK) Ltd.
8, Northumberland Av.
London WC2N 5BY
MADE IN CHINA
Manufacturer: ACR AG ∙ Bohrturmweg 1 ∙ CH-5330 Bad Zurzach ∙ Switzerland
Legal representative in EU: ACR S & V GmbH ∙ Industriestraße 35 ∙ D-79787 Lauchringen ∙ Germany
www.zenec.com
