58
59
Z-E2015
MAIN DEVICE SYSTEM SETUP: MISC
You may export/import your system
settings to/from a USB flash drive.
A helpful feature, to restore your device
settings after a software update, reset
or a complete power disconnection.
Display installed Main System software
versions.
Activate password function to secure
the device in case of theft. The anti-
theft function is based on CAN-bus
and is locking the device if it´s installed
to another car. It´s possible to enter a
4-digit password. The password code is
"0000" by default.
Press "OK" to launch a software update.
For preparation and details, consult the
accompanying update installation
instructions BEFORE you run software
updates.
NOTE:
Name
Function
Choice/Range
Help
TS Calibrate
OK starts touchscreen calibration.
Load factory
OK loads factory settings.
System Settings
Export settings to USB.
System Settings
Load settings from USB.
NOTE:
■
Compare installed software versions with potentially newer versions listed
on www.zenec.com.
Security
Password enable
On, Off
Password
OK sets password.
Update
Update
OK starts software update.
Info
Show Info
Software
Show Info
BT Software
Show Info
RDS
Show Info
Gracenote
