ZENEC Prime Z-EMAP66 Series User Manual Download

Page: 64 / 82

parking Places around the destination. By tapping the arrows on the sides, you can switch

between the recommended parking facilities.

By tapping

and

, the selected parking place

becomes your destination.

4.1.8.4 Hints upon detour

If you leave the planned route by exiting a motorway, ZENEC tries to guess the reason for

making a detour. The Reason for detour window appears and shows available petrol stations,

restaurants or other Places around the current position. Also, if there are avoidable parts of

the original route ahead (like a tunnel, a toll road or a ferry), you can find them in the list, in

case you want to bypass them.
By tapping one of the Places, ZENEC creates a waypoint and navigates you to the selected

place. You can ignore them by tapping

4.2 Useful Information menu

The Useful Information menu provides various additional functions. It can be found in the

Navigation menu.

Button

Description

Shows information on the current position (latitude, longitude, nearest town, next

crossing street, and so on) or the last known position if GPS reception is not

available. See page 65.

Offers assistance near your current position. See page 38.

Offers a list of countries with useful driving information about the selected country

(for example speed limits, maximum blood alcohol level).

Shows statistical data of your trips, like the start time, end time and average

speed, see page 66. Track logs, the sequence of the positions given by the GPS

receiver, can be saved together with the trip logs. They can later be displayed on

the map.

Summary of Contents for Prime Z-EMAP66 Series


















































































Search results

Summary of Contents for Prime Z-EMAP66 Series

Reviews:

Related manuals for Prime Z-EMAP66 Series

Brands by name

Popular brands

ZENEC Prime Z-EMAP66 Series, User Manual

Search results

Summary of Contents for Prime Z-EMAP66 Series

Reviews:

Related manuals for Prime Z-EMAP66 Series

Brands by name

Popular brands