
FIG-9 Setting the Top Panel
10. During the course of putting down the Top Panel, make sure all the wires (mentioned above) and
connecting plugs are slipped through the corresponding holes of the Top Panel. All these wires will
be led into connecting with the controller on the internal top panel.
11. See FIG-10. Connect all the wires and connectors to the corresponding outlets on the Top Panel.
Please be sure all the plugs are connected tightly.
FIG-10 Connecting wire on the top board
12. If you are certain that all steps have been completed correctly, plug in the power and turn on at the
control panel.
13. Once you are confident the sauna is heating up, screw on the Top Panel.
This completes the installation. Enjoy!
7