17
INITIALISING DESK
Using two people, carefully turn the desk upright on level floor. Connect the desk to power
and turn on.
Your Zen Space Desk may require initialising prior to use. If RST is displayed on the controller
when you connect to power, simply hold the DOWN button until fully retracted, releasing the
button once the height is displayed.
OPERATING THE HAND CONTROLLER
RESET Process requires your desk to lower to its lowest position (beyond any lower limit set).
To safety reset your desk please ensure you have the proper clearance below the desk by
moving any obstructions.
Anti Collision functionality is disabled during the reset process and will not stop the
desk during a reset procedure.
UP and DOWN
Press either the UP or the DOWN button for parallel drive and the system will move the desk
in either direction until the system reaches its end position or you let go of the button.
CAUTION
Display
Adjust Up
Adjust Down
Memory Slots
Store Memory
USB Port
