© 2020 Zen-Me Labs Ltd. Zen-Me is patented and trademark of Zen-Me Labs Ltd.
PAGE 3
Responsible Use
Care and Maintenance
Zen-Me devices include sensitive electronic components (including batteries).
These components can be damaged, lose functionality or cause injury if dropped, burned, crushed, taken apart or subjected to excessively
high temperatures, immersion in liquids or exposed to industrial chemicals or substances in high concentrations, including near
evaporated gases such as helium.
Never use damaged Zen-Me Sensors, Zen-Me Chargers or Zen-Me Pendants. Always operate, transport and store your Zen-Me Sensor,
Zen-Me Charger and Zen-Me Pendant according to the instructions in the Zen-Me product manual at
Zen-Me User Manual
(zenme.io/
manual).
Zen-Me Sensors and the Zen-Me App are NOT intended for medical use or the diagnosis, cure or prevention of any medical condition. Zen-
Me data has no scientific or medical purpose.
Although the data captured and recorded by Zen-Me can aid decision making, it must NOT be relied on in high-risk situations which could
result in damage to property or the environment or cause personal injury or death.
Zen-Me devices contain no user-serviceable components and do not need any routine servicing or maintenance. Do not try to open or
take apart any Zen-Me Sensor or Zen-Me Charger as this could lead to injury or an allergic reaction to materials contained within internal
components.
Any attempt to open or dismantle a Zen-Me device could result in permanent damage and invalidate your product warranties or
guarantees. Unauthorized repairs may also cancel authority to operate your Zen-Me device under Part 15 of FCC regulations.
If you experience problems with the performance of your Zen-Me device, contact
Zen-Me Support
(zenme.io/support).
• DO NOT expose your Zen-Me devices to excessively high or low temperatures
• DO NOT use abrasive materials, products or chemicals to clean your Zen-Me devices
• DO NOT use your Zen-Me devices in a sauna or steam room
• DO NOT dispose of your Zen-Me device in a fire as this could result in an explosion
• DO NOT charge your Zen-Me Sensor when wet or immersed in water or other liquids
• DO NOT charge your Zen-Me Sensor without following the instructions supplied
• DO NOT use any power source (computer, charging device or adapter) to charge your Zen-Me Sensor unless it is certified by a
recognized testing laboratory
For full information on product care, go to the
Zen-Me User Manual
(zenme.io/manual).
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
For user manual and other important information about Zen-Me products maintenance, read the
Zen-Me User Manual
(zenme.io/manual).
