channel on the T-
shaped connectors are facing the back of the enclosure (aligned with the channels from 10”
aluminum frame).
Step 3
–
Assemble Back and Sides
•
Decide which side you would like to be the hinge of your enclosure, left or right. Attach the side door frame
(Part B) to pressure corner on that side of the middle door frame. The single channel should face the back of the
enclosure.
•
Attach the side door frame with the door lock (Part C) hole to the other front pressure corner.
•
Attach aluminum frame (Part A-2) to the back two pressure corners, with the channels aligned with the bottom
frame channels.
•
Insert the two side panels (Part J-2) on the left and right-side channels. Insert the back panel (Part J-1), with the
grommet hole, in the back channel (the hole should be on top).
