INSTRUCTIONS
2.
Assemble the pole section. It is
important that the poles are fully
inserted into the ferrules. If the ferrules
do not connect together correctly they
can cause damage when tensioned.
8.
Peg out all peg points and guy
ropes, pegging at a 45
o
angle.
7.
Connect the fly to the
inner by connecting the
side release buckles at the
end of each pole line.
3.
Insert the pole ends in to the eyelets
found at each end of the inner. The
longer
RED
pole end should connect to
the eyelet on the
RED
webbing. Also
insert the ends of each brow pole into
the eyelets found above the door.
1.
Clear your site making sure there are no
sharp objects. Try to get a site that is as flat as
possible. Stretch out the inner tent.
1x
6.
Throw the flysheet over the
inner and fasten the Velcro
ties found on the inside of the
fly around the pole line.
4.
Connect the inner to the
frame by connecting the c clips
that run along the centre seam
of the inner tent.
5.
Peg out the inner tent. Try to
tension the floor so that it sits flat.