Type BM24L10 EHEDG Load Cell
Specifications and dimensions are subject to change without notice and do not constitute any liability whatsoever.
Zemic Europe B.V.
T: +31 76 50 39480
Nr. 2023.11 BM24L10 Installation and Operating Manual Rev1
Page 2/7
1.5 General Risk of Non-Compliance with Safety Instructions
The sensor is designed to be reliable, but may be at risk if it is improperly installed, positioned and
operated, or if it is installed, positioned and operated by untrained personnel. Any personnel
related to operation or maintenance must read and understand the installation instructions,
technical specifications and cleaning instructions carefully, particularly the technical specifications
and cleaning method, otherwise it may lead to damage of the sensor(s), and may result in property
damage and/or injuries of personnel nearby.
1.6 Product Changes and Modifications
For design and safety reasons, users are prohibited any change or modification to the sensor unless
expressly approved by ZEMIC. We are not responsible for any loss caused by any change or
modification without permission. Any modification without permission immediately voids warranty.
2 Installation
2.1 Mounting Dimensions
2-1 Product Installation and Loading Drawing
Note:
1) The loading point is allowed to have appropriate deflection angle, but within 5°.
2) The customer's bottom mounting plate shall have at least a bevel of 3° ~ 5° for liquid discharge/draining.
50Nm / 92 Nm
50Nm / 92 Nm
