Zelmer ZSVC222MP, User Manual

Page: 9 / 50

9
PL EN
Keep the motor unit, charger and cable away from all liquids. Make sure that water does not get into the
motor unit during cleaning.
Only the filter and the dust container may be cleaned with water. Ensure they are completely dry before
they are put back into the device.
The filter, the dry cleaning and the microfibre roller are not machine washable. Hand wash and dry the
parts with a clean, dry cloth. Allow to fully dry before further use.
Do not use any sharp or abrasive cleaning agents or cleaning pads to clean the device, as these could
damage the surface.
Clean the housing using a damp, soft cloth. Dry with a soft cloth.
Remove hair and fluff from the nozzles at regular intervals.
Store the vacuum cleaner and all accessories in a cool, dry place.
The filter may lose some of its colour over time. This is normal and does not have any adverse effect on
function.
Cleaning the cleaning foot
Dry cleaning brush:
1. To clean the dry-cleaning brush, release the locking catch next to the brush.
2. Remove the catch and pull out the dry-cleaning brush
3. Remove the hair, dust etc. Ife necessary you can wah the brush under running water
4. Let the brush dry completely in the air before you reinsert it.
5. Reinsert the brush by first inserting the side apposite the catch and then engaging the brush on the
side of the catch.
6. Reinsert the locking catch. It must engage audibly.
Microfibre Roller:
1. To clean the microfiber roller, release the locking catch next to the brush.
2. Remove the catch and pull out the microfiber roller
3. Remove the hair, dust etc. Ife necessary you can wah the brush under running water.
4. Let the microfiber roller dry completely in the air before you reinsert.
5. Reinsert the microfiber roller by first inserting the side opposite locking catch and the engaging the
roller on the side of the catch.
BATTERY REMOVAL
The appliance must be disconnected from the supply mains
when removing the battery.
Ensure that the product is discharged of all power. Unscrew the screws on the product housing.
Lift or pry the product halves apart, exposing the battery.
Disconnect the battery with the fast disconnection.
Pull the battery set from the unit.
Before disposing of the appliance, the battery must be removed.
The battery must be safely removed.