13
12
PL
PL
EN
EN
Maintain product drying, never charge at the temperature below 0ºC (32°F) or above 40ºC
(104°F) to direct sunlight or close to the heat and humid places.
Please do not insert or remove the charger with wet hands, and do not allow the AC
adaptor to get wet.
Please do not wipe the product or AC adaptor with thinner, benzene or alcohol.
Each time after use, please cover protective cover, to prevent the damage to blade foil. If
the blade foil or the inner blade head is damaged, do not use it.
In order to keep a good shaving experience we recommend that you replace the blade
regularly every 2 years
B&B TRENDS SL.
disclaims all liability for damages that may occur to people, animals or
objects, for the non-observance of these warnings.
HOW TO USE (FIG. 2)
• Remove the protection cap.
• Press the ON/OFF button to turn on the shaver
• Move the appliance quickly over your skin against the growing direction of beard. Make
both straight and circular movements.
• Press ON/OFF button to turn the shaver off. If you want to carry out for a travel, please
long press 3 seconds to turn off the shaver and lock your shaver to prevent the wrong boot
• Put the protection cap on the shaver after every use to prevent damage to the shaving
head.
For wet shaver
Put a thin layer of shaving foam on your face which works as a lubricator. Do not put a
thick layer of shaving foam that may affect shaver’s performance. If the shaving head is
clogged with foam, simply rinse it under running water.
CLEANING AND MAINTENANCE (FIG. 3 - 6)
For cleanliness and convenience, we recommend regular cleaning of your shaver. Regu-
lar cleaning will keep your shaver in good condition while preventing odors or bacteria and
maintain the clipping performance.
• Switch off the shaver and ensure it is not connected to the charger
• Pull the rotary head up and open (FIG. 3) the rotary head assembly (FIG. 4)
• You can clean the rotary head assembly under water
• Clean the inner cutter with the short side of the brush (FIG. 3)
• Clean the frame, hair storage chamber and with the brush provided (FIG. 5)
• Reassemble the shaver parts in reverse order (FIG. 6)
It is recommended to replace head assembly in order to maintain cutting performance.
CHARGING
• Switch off before charging it
• Connect the powerline to the shaver and plug the powerline to the USB port
• Charge the shaver for about 1 hour before use. The charge battery provides 60 minutes
battery life. Please notice: The discharge time is about 90 minutes without loading
• After charging is finished, unplug the cable
The energy consumption and therefore the usage time depend on your type of skin and
beard as well as your style of shaving (e.g. use of gel or shaving foam)
Before traveling, fully charge your shaver if you do not plan to take the adapter with you
RECYCLING THE BATTERY (FIG. 7)
Batteries contain substances that may pollute the environment. The battery in this product
is not intended to be replaced by consumers. However, the batteries may be replaced at
an authorized service centre.
Warning:
• The battery must be removed from the appliance before it is scrapped
• The appliance must be disconnected from the supply cord when removing the battery
• Disassemble the battery as recommend procedure (FIG. 7)
a) Disassemble all screws from the body
b) Remove the shell
c) Take out the circuit board, cut short the metal on both sides of the battery, and take
out the battery
• Only in the battery completely exhausted before the battery removed
• The battery should be of a safe disposal
PRODUCT DISPOSAL
This product complies with European Directive 2012/19/EU on electrical and
electronic devices, known as WEEE (Waste Electrical and Electronic Equip-
ment), provides the legal framework applicable in the European Union for the
disposal and reuse of waste electronic and electrical devices. Do not dispose
of this product in the bin, instead going to the electrical and electronic waste
collection centre closest to your home.
The product may contain batteries. Remove them before disposing of the pro-
duct and dispose in special containers approved for this purpose.
