59
JE1200-001_v08
The strainer may be mounted in one position
only.
4
Slide the pulp container under the lid as follows: lean the
pulp container and place it under the insert of the bowl so
that the protrusion in the pulp container is placed inside the
groove in the bowl. Then slide it in towards the motor unit.
5
Install the lid so that the protrusion of the lid is in the
notch of the juice bowl.
6
Lift up both clamps and clamp them onto the fasteners
located on the lid.
7
Press the clamps to the juice bowl (a characteristic click
indicates that they are clamped correctly).
8
Put the juice collector so that the juice spout is inside the
collector.
If you fail to assemble the locking clamps
correctly, a safety device will prevent the
switch-on of the appliance.
Prepare washed fruit and vegetables and place
them near the appliance.
Starting and operating the appliance
●
Make sure that the control knob is set to
“0”
.
●
Insert the power cord plug into a socket and start the
appliance by turning the control knob to level 1 or 2
depending on your needs (see the table
“Recommended
speeds”
).
●
Insert fruit or vegetables into the feeding tube on the lid
and guide them gently through using the pusher.
Never use your fingers or objects other than
the pusher to feed fruit or vegetables into the
feeding tube.
Do not process excessive amount of product
and do not force push the products in the
hopper, as excess juice may leak out through
the drain holes, which is a normal. This is not a
defect.
●
Transfer the extracted juice from the container into
glasses, cups, etc.
The jug has a lid with a froth separator to stop
coarse juice particles and froth.
●
If necessary (if excessive pulp deposited on the strainer
causes vibrations) use the
“PULSE”
function.
PULSE FUNCTION
The
“PULSE”
function allows to remove excessive pulp on
the strainer. Turn and hold the control knob to
“PULSE”
to
operate the appliance at maximum speed. Release the knob
to stop the appliance.
After each use
1
Turn the control knob to
“0”
to switch off the appliance.
2
Unplug the appliance.
●
Once the motor unit stops, disassemble the appliance to
wash all parts (see
“DISASSEMBLING”
).
●
Remove all pulp from the pulp container.
Never allow the pulp container to be overfilled.
Excess pulp can spill out while leaning the
container on disassembly.
Remember to empty the pulp container in time
as juice may leak through the drain holes.
Cleaning and maintenance
●
Wash the appliance thoroughly after each use to prevent
adhesion of juice and pulp to the walls.
●
Use a soft brush to remove dirt from crevices and
corners of the appliance.
●
Clean the motor unit using a damp cloth with some
washing liquid. Then dry thoroughly.
If water or juice leaks into the inside of the
motor unit, abort operation immediately and
have the appliance checked at a service centre.
●
Wash the following elements in warm soapy water: juice
bowl, lid, pusher, jug with froth separator, pulp container.
●
The lid, pusher and pulp container can also be washed in
a dishwasher at max. 60°C.
●
Wash the strainer only using the brush supplied with the
appliance.
Never use any metal brushes for washing
the strainer!
●
Some plastic parts of the appliance may change colour
after long-term use. It is not a defect.
●
Orange stains from carrot juice can be removed by
cleaning the surface with a cloth immersed in cooking oil.
●
Dry all parts thoroughly after washing.
●
Reassemble the appliance (see
“ASSEMBLING”
).
Take care when handling transparent plastic
parts of the appliance. They are sensitive to
hitting and falling and may break easily.
Preparing healthy and delicious juice
●
Fruit and vegetables for juice extraction process should
be fresh and well washed. Vegetables should be cleaned
of sand and soil under running water and peeled.
Handbooks on juice preparation recommend soaking the
vegetables in water with salt and citric acid for 5 minutes.
Prepared in this way, vegetables do not darken during
processing and the juice has a natural colour.
●
Berry fruits should be washed directly before use, so
they retain their freshness.
D
Summary of Contents for ZJE1200
