Zelmer ZCK8040, User Manual

Page: 8 / 52

8
PL EN
intended to be use in applications such as:
-staff kitchen areas in shops, offices and other working
environments;
-farm houses;
-by clients in hotels, motels and other residential type
environments;
-bed and breakfast type environments.
Never immerse the appliance in water or any other liquid.
If the kettle is overfilled, boiling water may be ejected.
Appliance is only to be used with the stand provided
Warning: avoid spillage on the connector
Warning: potential injury from misuse!
Heating element surface is subject to residual heat after use.
Allow the kettle to cool completely before cleaning.
Always remove the plug from the mains before cleaning the
kettle.
Do not use any abrasive cleaning agents – such as emulsions,
creams, pastes, etc. – for cleaning the kettle.
This appliance is intended for use at a maximum altitude of
2000m above sea level.
IMPORTANT WARNINGS
Any incorrect use or improper handling of the product shall render the warranty null and void.
Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the product
label.
The mains connection cable must not be tangled or wrapped around the product during use.
Do not use the device, or connect and disconnect to the supply mains with the hands and / or feet wet.
Do not pull on the connection cord in order to unplug it or use it as a handle.
Only fill the kettle with water. Milk and instant beverages will burn and damage the appliance. Never operate the
kettle without water and do not over fill it; observe the min and max markings. If the kettle is too full, the water
will boil over!
Do not put the jug on a stove or in a microwave for re-heating of water.