70
GW23-011_v01
After setting the continuous function (Co), press the
DESIRED
button
(L)
once again to
return to the beginning of the cycle – 40%. Changes are visible on the LED display
(3)
.
NOTE: Wait a few seconds after setting the mist output and then set the relative
humidity.
3. Humidity level selection button
(J)
Press the humidity level selection button
(J)
to set the amount of mist generated by
the humidifier. The possible settings are as follows: 1, 2, 3, 4 and TURBO. Changes
are visible on the LED display
(3)
.
NOTE: Wait a few seconds after setting the relative humidity and then set mist
output.
4.
STERILIZATION
button
(M)
Press the
STERILIZATION
button
(M)
to switch on the warm mist function. Water
will heat up to 80ºC. Press the button again to switch off the warm mist function and
to return to the cool mist function.
5. TIMER button
(N)
Press the
TIMER
button (N) to set the switch-off time. The timer can be set to 1, 2,
4 or 8 hours and continuous (CO). After setting the continuous function (Co), press
the
TIMER
button
(N)
once again to return to the beginning of the cycle starting from
1 hour. Changes are visible on the LED display
(3)
.
6.
AU/SLEEP
button
a) Press the button once to set the AUTO mode. The appliance will automatically set
the warm mist mode to keep the humidity at 50%.
NOTE: When in the AUTO mode the desired humidity and the humidity level
cannot be adjusted. Doing so will deactivate the AUTO mode.
b) Press the button for the second time to set the
SLEEP
mode. The humidifier will
automatically set the timer to 8 hours, then activate the warm mist mode to keep the
room humidity level at 60%.
NOTE: When in the SLEEP mode the desired humidity and the humidity level
cannot be adjusted. Doing so will deactivate the SLEEP mode.
c) Press the button for the third time: the AUTO and SLEEP modes will be switched off.
NOTE: When the water tank is empty, the unit will chime and the WATER EMPTY
(A) symbol will be shown on the LED display. The fan will operate for another
2 minutes and then the appliance will automatically switch off. Do not press any
buttons. Fill the tank with water and the appliance will restart automatically.
Cleaning and maintenance
Clean the appliance at least once a week.
1. Press the
POWER
button
(K)
to switch off the appliance and unplug the unit before
cleaning.
2. Remove the water tank
(5)
.
3. Empty the water tank
(5)
and the base
(6)
. Clean the inside of the tank with a mild
detergent.
Summary of Contents for 23Z052
