CUSHION HEIGHT ADJUSTMENT
To adjust the height of the cushion (10), loosen
but do not remove the securing knob (13).
Loosen and pull the fast pin (12), slide the
cushion (10) to the desired position, and secure
with the fast pin (12). Tighten the fast pin (12)
and securing knob (13).
NOTE: The pin of the fast pin (12) must be
inserted into one of the adjustment holes in the
cushion post (3). The fast pin (12) and securing
knob (13) must be screwed in tightly to ensure
that the cushion post (3) will fit securely in the
main support (1).
STORAGE
1.
To store the
Hyper Bench
,
simply keep it in a clean dry place.
2.
Use two people to lift from the left and right handrails ( 5, 6) and rear stabilizer
(8) to move the Hyper Bench.
3.
Follow the process below to fold the Hyper Bench as illustrated for easy storage.
a.
Loosen but do not remove the securing knob (13). Loosen and pull the fast pin
(12), slide the cushion (10) to the lowest position. Then lock in position by
tightening the fast pin (12) and securing knob (13).
b.
Remove the pin (14) to fold the front support (4). Store the pin (14) in the hole in
the main support (1).
c.
The Hyper Bench should appear as shown in illustration B after folded.
