Zektor HDS4, Owner'S Manual, Page: 5 / 20

5
Programming your Remote Control
Setting up your Universal Remote Control
Before use, the HDS4 requires a Universal Remote control to be programmed to control the HDS4.
Or alternatively, the HDS4 can learn to use most existing remote controls.
The simplest way begin using the HDS4, is to program your remote control to act like a Jerrold Ca-
ble Box. Once this is done you will be able to immediately start using your HDS4.
Check your remote’s user manual for instructions on programming your remote control.
The following table shows the Jerrold Cable codes for a few different brands of Universal Remote
Controllers:
Make Device Code
Sony CBL 001
One For All CBL 0476
Sanyo CBL 303
GE / RCA CBL 046
X10 CBL 062
Zenith / Phillips /
Magnavox
CBL 552