Zektor HD1600-V2, User Manual

Page: 12 / 46

12
HD1600V2 User Guide, Version 1.4, 10/30/13
Using the Front Panel
Mapping an input to an output zone
Mapping an input to an output zone with breakaway options
To map any source (input) to any zone (output):
If the LCD display is not at showing the main menu press the
MENU
button.
To change the Coax Output mappings:
Use the
SELECT
knob to select the “Map Audio Input /Output” option:
CoaxSw
The
CoaxSw
screen is used to point a Coax output at an HDMI source. When a Coax output point
to an HDMI source, all audio on that source will be extracted and sent to the Coax output.
To change the HDMI mappings:
Use the
SELECT
knob to select the “Map HDMI Input /Output” option:
HdmiSw
To change the HDMI mappings with audio/video breakaway:
While in the
HdmiSw
screen, press the
BACK
button.
The
BACK
button is used to flip between the normal HDMI switching screen, and the HDMI with
audio/video breakaway screen.
When using the
HdmiSw
with breakaway screen, the 1st (single digit) source is the HDMI video
channel. The 2nd (two digit) source is the HDMI audio channel. For instance in the above display
HDMI zone 3’s video channel is set to source 5, the audio channel is set to source 14.
HDMI: A 1 2 3 4 5
SRC: 00[03]00 00 00 00
SELECT
MENU ZONE
SETTING
NEXT BACK
HZ: A-AA 1-1A 2-2A 3-3A
HS: 0-00[4]01 0-00 5-14
SELECT
MENU ZONE
SETTING
NEXT BACK