Zektop MAS7.1, Reference

Page: 14 / 32

14 MAS7.1 Suplemental Guide, Rev 1.1, 9/28/07
MAS7.1 Command Reference
‘IRC’ Set Learnable IR Code
This command is used to set, or retrieve, the current IR codes associated with the learnable IR commands.
This could be useful for “cloning” the IR codes learned in one MAS7.1 into another MAS7.1.
IRC
ircmd
,
ircode Set the ‘ ircmd ’ to use the IR code ‘ ircode ’.
IRC
ircmd
,?
Query for a single IR command.
IRC ?
Query for all ‘ ircmd ’ settings.
Response String:
=IRC
ircmd
,
ircode
Where:
ircmd = IR command number being set / retrieved (See Table).
ircode = 72 bit (18 hex digits) IR code (See: “IR” command).
The value ‘ircmd’ refers to the IR commands that the MAS7.1 is able to learn, they are:
IRCmd Description
1 Toggle Power
2 Select Input 1
3 Select Input 2
4 Select Input 3
5 Select Input S1
6 Select Input S2
7 Select Input S3
8 Toggle SYNC
9 Discrete Power On
10 Discrete Power Off
11 Sequence through inputs
12 Sequence through secondary inputs
13 Turn on SYNC LED
14 Turn off SYNC LED
Setting an ‘ ircmd ’ to ‘ ircode = 0’, causes that command to no longer respond to IR.
IR codes are always saved in EEPROM.
‘LI’ Front Panel Light Intensities and Mode (*)
Set the mode, dim and bright levels of the front panel LEDs:
LI
mode
,
dim
,
bright Set the MODE, DIM, and BRIGHT.
LI
mode
,
dim
,
bright,
$
Set levels, and backup settings in EEPROM.
LI ?
Query for current settings.
Response String:
=LI
mode
,
dim
,
bright
Where:
mode = MODE setting.
dim = DIM level setting.
bright = BRIGHT level settings.