SIMPLE HI
assembly instruction 06/2019
Tools:
Allen screw SW4 und SW5 (enclosed), crosstip screwdriver
8x XS bolts
2x countersunk bolts (5x60)
8x
boxes
2x countersunk bolts (5x80)
8x grub screws
1x countersunk bolt (M8x50)
24x confirmat screws
ZEITRAUM GmbH
•
Äußere Münchner Straße 2
•
D-82515 Wolfratshausen
•
Tel + 49 (0) 8171 – 418130
•
Fax + 49 (0) 8171 – 418141
•
•
www.zeitraum-moebel.de
Funktionsvideo:
https://www.youtube.com/watch?v=ioIUTDqtvgE
1.
Screw in the bolts, inside the boxes
in the holes. Now connect and fix the
headboard with the grub screws.
5.
Fix the side support files and the middle
plank with the Confirmat screws.
2.
Connect and fix the foot end following the
same procedure.
6.
Screw in the middle base. Mind to
use the right length.
3.
Slot the two crossbars.
4.
Connect and fix the second
sidepiece.
Please note that the supports can be fixed at three different heights. Use the
confirmat screws to fix the supports to the side elements. We recommend that
the mattress stands about 2 inches above the bed sides. With mattresses of
more than 140cm in width the middle support must be used. If necessary use
the distance piece and the screws for the right height. For Position 2 use the
distance piece in flat direction, for Position 3 rotate the distance piece upright.
Afterwards fit the height-adjustable foot. Please set the hight of the adjustable
foot 1-2 cm lower than the other feet.
Pos. 1
Pos. 2
Pos. 3
SUPPORTS FOR SLATTED BASE
