Zeiss Victory RF 10x42, Instructions For Use Manual

Page: 11 / 99

3 | 7 EN
PREPARATION
Inserting/Removing the battery
The laser range finder is powered by a type CR 2 lithium battery.
To insert and replace the battery, unscrew the battery cover
(Fig. 3/8) – using a coin
or similar – by turning anticlockwise. Insert the battery with the positive end forward
(according to the symbol in the battery compartment).
Then screw the battery cover back on by turning clockwise.
At 20 °C, a new battery will last for over 2,500 measurements.
Depending on the conditions of use, however, low temperatures or frequent use of
the scan mode for example may result in the battery life being considerably shorter.
Low battery is indicated by the appearance of the battery symbol on the display.
If the equipment will be unused for a long period, remove the battery in order to
prevent damage by leakage from the battery. Use only high quality brand batteries.
+
–
(8)
Fig. 3
Fig. 4
(16)
(15)
Fig. 5
(17)
Attaching the carrying strap and the protective caps
The carrying strap (Fig. 4/15) and the eyepiece cap (Fig. 4/16) are attached as
shown in the illustrations.
Note: Feed the carrying strap only once through the eyelet on the eyepiece cap.
Depending on personal taste, use the carrying strap to connect the eyepiece cap
either on both sides or on one side only. The eyepiece cap is held onto the eye cups
by a catch.
Before using the binoculars, remove the eyepiece cap with the index finger.
After observation, replace the eyepiece cap in order to protect the eyepieces.
The protective lens covers
(Fig. 5/17) are fitted on the binoculars as shown.
TECHNICAL DATA 8x42 10x42 8x54 10x54
Magnification 8 10 8 10
Effective lens diameter mm 42 42 54 54
Exit pupil diameter mm 5.3 4.2 6.8 5.4
Twilight factor 18.3 20.5 20.8 23.2
Field of view m/1000m (ft/1000yds) 135 (405) 115 (345) 120 (360) 110 (330)
Subjective angle of view ° 62 66 55 63
Close-up setting limit m (ft)
2.5 (8.2) 3.5 (11.5)
Diopter adjustment range dpt
+/- 3 +/- 3
Eye relief mm 17 (0.7) 14 (0.6)
Pupil Distance mm 53.5 - 76 58.5 - 76
Lens type FL FL
Prism system Abbe-König Abbe-König
Coating T*/LotuTec ® T*/LotuTec ®
Nitrogen filling  
Waterproof mbar
400 400
Operating temperature 1 °C (°F)
-25 / +63 (-13 / +145) -25 / +63 (-13 / +145)
Length mm (in) 166 (6.5) 166 (6.5) 195 (7.7) 195 (7.7)
Width with an eye spacing of 65 mm mm (in) 121 (4.8) 121 (4.8) 136 (5.4) 136 (5.4)
Weight g (oz) 895 (31.6) 915 (32.3) 1,095 (38.6) 1,115 (39.3)
Measuring range 2 m (yds) 15 - 2,300 (16 - 2,500) 15 - 2,300 (16 - 2,500)
Measuring precision mrad ± 1 – 600 / ± 0.5 % > 600 ± 1 – 600 / ± 0.5 % > 600
Measuring time Sek. (sec.) < 0.3 < 0.3
Laser shaft length nm 905 905
Laser beam divergence mrad 1.6 x 0.5 1.6 x 0.5
Battery 1 x 3V / CR2 1 x 3V / CR2
Battery life at +20°C > 2,500x > 2,500x
Subject to changes in design and scope of supply due to technical improvements.
1 Battery is subject to a lower temperature limit.
Product also functions under – 10 °C /14 °F.
2
The range is influenced by the size and the degree of reflection of the object
as well as by the weather and sun beams.