INSTRUCTIONS FOR USE
Congratulations on the acquisition of your new Victory
®
Harpia by ZEISS. Enjoy
impressive, true-to-life image viewing that stands out from the crowd, characterised
by a wide field of vision and the ability to reproduce even the smallest details.
ZEISS brand products are synonymous with outstanding optical performance, precise
processing, and long service life.
To ensure that you get the best use from your spotting scope and can rely on it for
many years to come, please observe the following instructions for use.
Further information and safety instructions be found in the QuickGuide provided.
This guide can also be found at the Download Center on our website.
INFORMATION FOR YOUR SAFETY
Environmental influences
• Never look directly into the sun or laser light sources with the spotting scope, as
this can result in severe damage to your eyes.
• Do not expose the device to the sun for longer periods of time without a
protective cover. The objective lens and the eyepiece can act as a magnifying
glass and damage the inner components.
• Do not drop the device and avoid direct impact to it.
• Avoid touching the metal surface after solar radiation or cold.
Choking hazard
• Keep the removable exterior parts of the device out of the reach of children
(choking hazard).
• Allow only authorized workshops or employees of Carl Zeiss Sports Optics
GmbH to perform repairs. Allowing the device to be repaired by unauthorized
workshops or opening it improperly will render the warranty void.
2 | 4
EN
Inserting and removing the eyepiece
Remove the protective cap from the eyepiece and the protective bayonet cover from
the spotting scope.
Left:
To insert the eyepiece
(1)
into the eyepiece socket
(2)
, the eyepiece must be
turned by 45° using the safety knob
(3)
, as pictured. To lock, turn the eyepiece
clockwise until the safety knob
(3)
clicks into place.
Right:
To remove the eyepiece, pull the safety knob
(3)
upwards and turn the
eyepiece anti-clockwise. You can remove the eyepiece by gently pulling it out.
Tripod mounting
Because of the high magnification, observation without a tripod is not
recommended.
Above:
The tripod shoe of the ZEISS Victory Harpia
(4)
has 3/8“ and 1/4“ threading
(via integrated threaded insert) that allows the ZEISS Victory Harpia to be mounted
onto all conventional tripods. But the tripod shoe of the ZEISS Victory Harpia fits
directly onto all tripod heads except for the standard plate 200PL.
Below:
The tripod ring
(5)
on your ZEISS Victory Harpia enables you to turn the
spotting scope around the lengthways axis, so that you can change the viewing
direction of the angled eyepiece where required. To do this, release the clamping
screw
(6)
on the tripod holder (turn counterclockwise) and then turn the spotting
scope in the desired direction. The best locking is achieved in the locking positions
that are available every 45°.
(4)
(5)
(5)
(6)
(1)
(2)
(1)
(2)
(3)
(3)
Summary of Contents for VICTORY HARPIA 95
Page 1: ......
