SteREO Discovery
Vertical Illumination Device S
Carl Zeiss
SM70-2-0021_v 05/2012
435505-7044-010
III
Putting into Operation
•
Attach the Vertical Illumination Device S
(Fig. 1/
2
) from below to the objective (Fig. 1/
1
)
of the stereomicroscope, orientate it to north-
south (push-pull rod (Fig. 1/
5
) projects
frontward, i.e. to the user) and fix it using both
screws (Fig. 1/
6
).
•
Introduce the flexible light guide (Fig. 1/
3
) into
the mount of the Vertical Illumination Device S
as far as it will go (if necessary, loosen the
knurled screw (Fig. 1/
4
) slightly) and tighten the
knurled screw (Fig. 1/
4
).
•
Connect the flexible light guide with the cold-
light source.
•
Switch on the cold-light source.
Operation
The illumination mirror of the Vertical Illumination
Device S is movable between 0 and 19 mm in
north-south direction and can be locked in any
position within this range. With a Plan S 1,0x
objective, this corresponds to an angle of 0 to 8°.
This allows the position of the illumination mirror
to be optimized in dependence on the objective
and zoom setting in order to obtain the
appropriate illumination of the specimen and
exclude vignetting.
•
For an optimum observation of the object,
adjust the illumination angle of the mirror
(Fig. 2/
1
) by shifting the push-pull rod (Fig. 2/
3
).
•
Fix the position of the push-pull rod by
tightening the clamping knob (Fig. 2/
2
).
•
If the objective is attached to the objective slider
S/doc or to the triple objective nosepiece S/doc,
6x cod. in mono position, the push-pull rod
must be re-adjusted to optimize the observation
of the object. If the mono position on the
objective nosepiece S/doc is used, also the
Vertical Illumination Device S must be re-
adjusted in north-south direction.
The scale with 2 mm intervals on the push-pull rod allows the reproducible adjustment of the
mirror position.
1
Objective
2
Vertical Illumination Device S
3
Flexible light guide
4
Knurled screw
5
Push-pull rod
6
Screw (2x)
Fig. 1
Attaching the Vertical Illumination
Device S
1
Mirror
2
Clamping knob
3
Push-pull rod with scale
Fig. 2
Operating the Vertical Illumination
Device S
Summary of Contents for SteREO Discovery Vertical Illumination Device S
Page 1: ...Vertikalbeleuchtung S Vertical Illumination Device S Bedienungsanleitung Operating Manual...
Page 6: ......
Page 10: ......