Zeiss S100/OPMI pico Instructions For Use Manual Download Page 261

Page: 261 / 278

Version 7.0
G-30-1781-en

Page 261

S100 / OPMI pico

Indexes

Indexes

List of technical terms

Term

Explanation

Apochromatic optics

Optical system with maximum correction of chro-
matic aberration

Drapes

Sterile covers for surgical microscopes

FlexioStill

Adapter for the attachment of digital compact
cameras to ZEISS surgical microscopes

FlexioMotion

Adapter for the attachment of camcorders to ZEISS
surgical microscopes

Interlace (i)

In interlace mode, the even and uneven-numbered
lines are alternatively set up. Todays video stand-
ards are based on this procedure.

Progressive (p)

In Progressive mode, images are displayed in full
frames. This way, the line structure cannot be rec-
ognized and interline flicker is prevented.

Radiation intensity

Radiation incident or emitted at right angles per
unit time and unit area.

VisionGuard

Lens guard for ZEISS surgical microscopes

Summary of Contents for S100/OPMI pico























































































































































































































































































Search results

Summary of Contents for S100/OPMI pico

Reviews:

Zeiss S100/OPMI pico, Instructions For Use Manual, Page: 261 / 278

Search results

Summary of Contents for S100/OPMI pico

Reviews: