Zeiss Primostar 3, Instruction Manual

Page: 85 / 112

ZEISS 6 Care and Maintenance | 6.1 Safety during Maintenance
6 Care and Maintenance
To ensure the best possible performance of the Microscope, maintenance must be performed on
a regular basis. To maintain operational safety and reliability of the Microscope, we recommend
entering into a
ZEISS Protect service agreement . Please keep the service logs for your Micro-
scope.
Info
Additional information and detailed descriptions are available in the further applicable docu-
ments, or ask your ZEISS Sales & Service Partner.
6.1 Safety during Maintenance
Only perform preventive measures as described in the document. All maintenance, service and re-
pair work not described above may only be performed by an authorized ZEISS service technician.
Unauthorized interference with the microscope or improper use may result in personal injury or
property damage and void any warranty. Only original spare parts from ZEISS may be used.
DANGER
Voltage
Voltage hazard in case of contact with live parts. Risk of burns and electrocution.
4
Switch off microscope prior to opening and cleaning.
4
Disconnect live parts from the power supply.
6.2 Maintenance Schedule
In order to ensure optimum performance of the microscope, it is essential to perform preventive
maintenance at regular intervals. The recommended intervals depend on the duration of use of
the microscope.
Time Interval Unit/Component Activity
If required 6 V/30 W halogen lamp of
the halogen module Replace the 6 V/30 W halo-
gen lamp, see
Replacing the
6 V/30 W Halogen Lamp of
the Halogen Module [
}
86] .
If required Batteries of the battery sup-
ply unit Replace the batteries of the
battery supply unit, see
Re-
placing the Batteries of the
Battery Supply Unit [
}
87] .
If required Batteries of the battery sup-
ply unit Charge the batteries of the
battery supply unit, see
Charging the Batteries of the
Battery Supply Unit [
}
88] .
If required Fuse of the battery supply
unit Replace the fuse of the bat-
tery supply unit, see Replac-
ing the Fuse of the Battery
Supply Unit.
Instruction Manual ZEISS Primostar 3 | en-US | Rev. 1 | 415501-7011-111_en 85