Zeiss Primostar 3, Instruction Manual

Page: 67 / 112

ZEISS 5 First Operating Steps | 5.3 Adjusting the Tube
5.2.3 Microscope is connected to a Power Bank
Prerequisite
ü The microscope and all components to be used are completely installed.
ü The power bank is charged and connected to the microscope.
Procedure 1. Ensure the DC 5V switch is in the IN position.
2. Switch on the power bank.
3. Switch on the
main power ON/OFF button.
5.3 Adjusting the Tube
The following action comprises several individual action sequences:
Prerequisite ü The microscope is connected to the mains and is switched on.
Procedure 1. Setting the Interpupillary Distance [
}
67]
2. Setting the Viewing Height [
}
68]
3. Setting the Eyepiece with Eyepiece Pointer or Eyepiece Micrometer [
}
68]
5.3.1 Setting the Interpupillary Distance
Info
The adjustment of the interpupillary distance is correct when you see only one round image
while looking through the two eyepieces.
Procedure 1. Rotate the eyepiece tubes symmetrically to-
ward or away from one another.
Instruction Manual ZEISS Primostar 3 | en-US | Rev. 1 | 415501-7011-111_en 67