4 Switching On/Off Safely
ZEISS
4 Switching On/Off Safely
The Primostar 3 is delivered in a fully assembled condition. It can be set up and calibrated by the
customer himself or through the ZEISS service.
Procedure
1. Connect the Microscope’s power supply with
its power cord to an electrical outlet.
2. Switch the Microscope on using the
Main
switch
on the rear side of the stand. Please
also refer to the complete Instruction Manual
when using the Microscope.
3. After use, switch the Microscope off using the
Main switch
on the rear side of the stand.
22
Quick Guide ZEISS Primostar 3 | en-US | Rev. 1 | 415501-7012-101