100
Description
G-30-1529-en
OPMI® VISU 160 on S8, S81 & S88 Suspension Systems
Issue 5.0
Printed on 09. 10. 2006
Instrument tray (option)
The S88 floor stand can be equipped or retrofitted with an instrument tray
(1). In the case of retrofitting, our service staff or an authorized person will
install the instrument tray on your suspension system.
The instrument tray (1) can carry a maximum of 13 kg. It is designed for
mounting the Zeiss instruments VISULAS 532s or MediLive Trio:
–
The four receptacles (2) on the instrument tray are intended for VISU-
LAS 532s. The VISULAS 532s is secured in position with its feet in
these four receptacles.
Caution:
Secure the VISULAS 532s from being pulled accidentally downwards
with the aid of the strap provided.
–
The four receptacles (2) are not required for the MediLive Trio. The
MediLive Trio is attached to the instrument tray with the aid of two
stud bolts.
–
A second MediLive Trio or other accessory equipment can be mount-
ed on the instrument tray using the strap provided. Please note that
the maximum load bearing capacity of the instrument tray is 13 kg.
Warning!
•
Make sure that the accessory equipment is positioned as securely as
possible on the instrument tray. Attach the second and, if required, fur-
ther accessory equipment using the strap provided.
•
Do not place a load of more than 13 kg on instrument tray (1).
•
Remember there is a risk of collision and crushing when suspension
arm (3) is folded to its moving position. A "Risk of crushing" warning
label is therefore attached on the left and right of suspension arm (3).
•
Please read the relevant user manual before starting up the accessory
equipment.
•
If you have a VISULAS 532s on the instrument tray:
–
Before start-up, familiarize yourself in particular with the safety
regulations (see instruction manual) with regard to "the hazards of
laser radiation".
–
Never under any circumstances pull carrying handle (4) in order to
move the S88 floor stand. Always use only handle (5) to move the
S88 floor stand.
