178
Operation
G-30-1607-en
OPMI® VARIO on S8, S81 & S88 Suspension Systems
Issue 5.0
Printed on 30. 01. 2009
Display of the working distance or total magnification (OPMI Vario)
This function permits you to switch between displays.
In the basic mode, either the working distance (in mm) or the total magni-
fication (as a factor) is displayed in the middle display field.
The associated buttons "
∇
" and "
Δ
" allow you to switch between these dis-
plays.
Displaying the working distance:
The working distance is displayed as a symbol and a numeric value
which indicates the current working distance in millimeter. The current
working distance is displayed in 5 mm steps.
Displaying the total magnification (MAG):
The total magnification of the optical system is displayed as the abbrevi-
ation MAG and a numeric value (factor) which indicates the current total
magnification in steps of 0.1.The total magnification is calculated by the
software. For this purpose, the magnification of the eyepieces currently
used must be known to the software. Use configuration menu 3 to enter
the current eyepiece magnification.
Setting the user ID
Menu item USER, for details see page 172.
Path: To access the speed mode (MENU A), press the MODE button in
the basic mode.
To change to configuration mode 1 (SETTINGS 1), press the
MODE and STORE buttons simultaneously.
MODE
STORE MANUAL
USER
1
250 mm
1
5.0
Basic mode
