24
Description
G-30-1292-en
OPMI® PRO magis Surgical Microscope
Issue 3.0
Printed on 30. 07. 2001
17
Cable and light guide clip
18
Instrument connector
for the power supply of the microscope.
Note:
Switch off the main power switch at the suspension system before
plugging in or unplugging the instrument connector.
19
Socket for the S light guide
Insert the S light guide into the socket until it snaps in.
20
Light stop lever
The diameter of the illuminated field can be continuously adjusted
from a fully illuminated field (
∅
55 mm) to ”spot” illumination (
∅
11 mm)
using the light stop lever. This data applies to an objective focal length
of f = 200 mm. With the ”spot” setting, luminance is approx. twice as
high as in the largest possible illuminated field.
21
Reset button
Press this button to set the microscope to the starting position of the
focusing range.
22
Zoom knob
Use this knob for manual setting of the magnification.
Summary of Contents for OPMI PRO magis
