Zeiss OPMI Lumera i on floor stand, Instructions For Use Manual

Page: 58 / 178

Overview of devices OPMI Lumera
®
i on floor stand
Version 9.2
Page 58 G-30-1720-en
Preconfigured button assignment
Buttons The functions of buttons A, B, C, D, E, and F are preconfigured, but they
can be reassigned to meet the user’s specific requirements. The factory
settings are:
– Button A: light intensity
– Button B: light intensity
– Button C: video mode selection (e.g. anterior or posterior)
– Button D: selection of video image orientation
– Button E: light source on/off
– Button F: light source on/off
Joystick The joystick is located between buttons C and D and is used to control the
XY coupling.
Rocker switches The default settings (focus/zoom) of the rocker switches are preconfigured
horizontally or vertically for each country. However, a ZEISS Service technician
can change the settings at any time. You can make user-specific settings your-
self (see page 112) at any time.
The horizontal factory settings are:
– Button I: focus
– Button G: zoom
– Button J: focus
– Button H: zoom
The vertical factory settings are:
– Button I: zoom
– Button G: zoom
– Button J: focus
– Button H: focus
B
D
F
A
C
E
I
G
J
H