Zeiss OPMI Lumera i on floor stand, Instructions For Use Manual

Page: 15 / 178

OPMI Lumera
®
i on floor stand Safety measures
Version 9.2
G-30-1720-en
Page 15
Notes for the operator
Correct operation of the device is required in order to ensure safe use:
•
Please familiarize yourself thoroughly with these instructions for use
before using the device for the first time.
•
Please also observe the instructions for use applicable to other equipment.
You can obtain additional information from ZEISS Service.
•
The instructions for use contain warnings and safety information that
describe the possible residual risks.
Follow these instructions carefully to reduce the residual risks for users
and patients to a minimum!
Duties of the operator
•
Only operate the device within the scope of its intended use.
•
Note the labels attached to the system! (see page 34)
Legal regulations
•
Observe the applicable legal provisions concerning accident prevention
and occupational safety in your country.
•
If required by the applicable national laws and regulations, connect the
device to the “Special Emergency Power Supply”.
Reporting to manufacturer
and authorities
•
If a serious incident occurs in connection with this medical device affecting
the operator or another person, the operator (or person responsible) must
report this serious incident to the manufacturer or seller of the medical
device. In the European Union, the operator must report this serious inci-
dent to the competent authority in his country.
Notes on the system
•
Make sure that the installation conditions and the use of the device meet
the surgical requirements:
– Low vibration
– Clean environment
– Avoid extreme mechanical stress