Zeiss opmi lumera 700, Instructions For Use Manual

Page: 93 / 236

Instructions for Use 4 Installation
OPMI LUMERA 700 4.3 Connections
G-30-1673-en - 14.0 - 2018-07-12 93 / 236
4.3.2 Connecting the 14-function foot control panel
The device can be controlled using either the wireless or wired
variants of the foot control panel.
4.3.2.1 Connecting the wireless variant
Action 1. Turn on the device at the power switch.
2. Put the 14-function foot control panel in a vertical position in
the immediate vicinity of the device.
3. Run the pairing. [
}
140]
4.3.2.2 Connecting the wired variant
1
2
Figure 56: Connector panel
1 Foot control panel connector 2 Foot control panel connector
Material • 3m, 6m or 10m cable
Action 1. Insert the 4-pin connector (straight or angled) into the foot
control panel port on the suspension system.
2. Insert the 6-pin connector into the foot control panel port on
the 14-function foot control panel.