Zeiss opmi lumera 700, Instructions For Use Manual

Page: 129 / 236

Instructions for Use 6 Before every use
OPMI LUMERA 700 6.4 Preparing the system for sterile use
G-30-1673-en - 14.0 - 2018-07-12 129 / 236
6.4.2 Placing the drape
1
Figure 73: Placing the drape
1 Objective lens
NOTE
Reduced image quality!
Drapes with vision guard may reduce the image quality of the
optics.
u
Remove the protective film from the drape lens.
u
If the drape lens is dirty, replace it with a new one.
Material • Without camera: drapes (460 mm x 330 mm)
• For 2 observer tubes with camera: sterile
OPMI drapes (1220 mm x 2090 mm) or sterile
OPMI drapes (1220 mm x 3000 mm)
Action 1. Place the drape on the objective lens. Make sure there is suffi-
cient room for the surgical microscope to move.
2. To prevent slippage: secure the drape with the included
adhesive tape.