Zeiss LSM 880, Operating Manual

Page: 599 / 690

CHAPTER 3 - ADDITIONAL SOFTWARE TOOLS
LSM 880 ZEN Configuration Tool ZEISS
10/2014 V_01 000000-2071-464 7
3 ZEN Configuration Tool
The configuration tool provides access to the database of a system. Be aware that wrong entries
can lead to a malfunction of the system. Always keep a backup of the original database. The
database of the system is stored in C:/ZEN/database. Always make a copy of the database before
you start to configure it.
Do not change any main settings or your system will not work anymore.
The following procedure describes how to define a new filter for external detectors like NDD or BiG.2.
Once defined within the configuration tool (Fig. 11), these filters will also be accessible via ZEN.
•
Open the tool; it will refer to the last database used which should be the systems database.
•
Make sure you have a copy of this database.
•
In case this is not the right database click Browse and choose the database to be configured.
•
Click
Start configuring
.
Fig. 11 Configuration Tool for LSM