Zeiss LSM 880, Operating Manual

Page: 582 / 690

CHAPTER 2 - MACROS AND VISUAL BASIC
ZEISS Visual Macro Editor LSM 880
24 000000-2071-464 10/2014 V_01
•
Assign the value 1 to a variable named Index
(see Fig. 13).
•
Click the single action blocks and assign the
values to the listed properties (beam path and
scan parameters can be chosen according to the
sample).
•
See Fig. 14 / Fig. 15.
•
The database of the images will be appended to
be automatically displayed when highlighting
the
Append to Database
action block. The last
one used will be taken. To update this, open
the desired database and use the
Read back
function. Type in a name for the images with or
without quotation marks. All images will get the
same name then. For numbering the images
use quotation marks for the name and add the
variable Index, which has been assigned with
the value 1. This value or the transiently
changed value of the variable will be added to
the name of the image (see Fig. 16).
Fig. 13 Assignment of the variable
Fig. 14 Property list of the Beam Path action
block
Fig. 15 Property list of the Scan Parameter
action block
Fig. 16 Property list of the Append to Database
action block