Zeiss LSM 880, Operating Manual

Page: 525 / 690

CHAPTER 1 - SYSTEM OPERATION
LSM 880 Center Screen Area / Image Containers - Display and Image Analysis ZEISS
10/2014 V_01 000000-2071-464 519
The map size in terms of region numbers is
displayed in the info area of the
Settings menu.
By pressing
Generate
a map is created with region
and shift sizes as determined in the settings.
During creation of the new map, an old map will
be overwritten. The progress in calculation is
displayed in the intensity image by an overlay
region and the black map is filled with white
regions (Fig. 726).
The
Generate button will only be active, if the
correlation was fit to a model beforehand to
ensure the correct one was selected.
Only at the end of the map, the scaling is
calculated and the map displayed in the chosen
palette. By pointing the pointer to a region in the
map, the corresponding site from which this data
point was derived will be displayed in the intensity
image by the overlay region. By pressing
Export
maps will be saved according to the settings in an
.lsm format or the type you choose in the
Windows Explorer popup menu.
Fig. 726 Progress indicator during creating a
map in the intensity (upper panel)
and map (lower panel) images