Zeiss LSM 880, Operating Manual

Page: 165 / 690

CHAPTER 1 - SYSTEM OPERATION
LSM 880 Left Tool Area and Hardware Control Tools ZEISS
10/2014 V_01 000000-2071-464 159
The
Info
window pops up (Fig. 222).
Press Yes to delete the configuration, No to keep
the configuration.
To save a marker configuration press the
Save
button (symbolized by the disc icon).
This opens the Save current marker
configuration as
panel (Fig. 223).
Type in an appropriate name in the Configuration
field and press
Ok
to save the configuration in the
data base or press Cancel to abort the process.
When the image series is stored, all the markers,
including the time indication and the comments,
are stored along with the image contents.
The markers visible in the image series have different colors with the following meaning:
−
red : manually set marker with time indication and comments
−
blue
: automatically set marker with change of delay
−
green : automatically set marker at the beginning and at the end of a bleaching procedure
5.2.19.3 Start
Expand the
Start
field by clicking the triangle
(Fig. 224).
In the
Mode
drop down menu (Fig. 225) you can
select the way the acquisition is triggered. You
have the choice between Manual, Trigger and
Time.
If
Manual
is selected the acquisition of a time
series is started using the Start Experiment action
button.
Fig. 222 Delete information window
Fig. 223 Save current marker
configuration as window
Fig. 224 Start field
Fig. 225 Start Mode drop down menu